by qtuner » Mon Sep 05, 2011 9:01 pm
Version 1.0
Description: The keypad can't enter all values of delay times for fractional delay times when midi clock is on. entering values 0-14 do work, but anything greater than 14 will set the value of [Time L] or [Time R] to 1/4d . The display will also show that 14 is entered for any value above 14.
Expected behavior: values over 14 entered on the keypad should correspond with the appropriate delay values
Steps To Reproduce
1) load init program
2) press [home] button
3) press [more] button
4) press [Delay] soft button
5) set [MIDI clk] to on
6) turn [time L] soft knob to bring focus to [Time L] parameter
7) enter 17 into keypad
8 ) press [enter]
result: 14 shows up on main display, and 1/4d is selected. Also note that the label in the main display is incorrect in that it reads "Delay Delay Time". It should probably read "Left DelayTime"
Version 1.0
Description: The keypad can't enter all values of delay times for fractional delay times when midi clock is on. entering values 0-14 do work, but anything greater than 14 will set the value of [Time L] or [Time R] to 1/4d . The display will also show that 14 is entered for any value above 14.
Expected behavior: values over 14 entered on the keypad should correspond with the appropriate delay values
Steps To Reproduce
1) load init program
2) press [home] button
3) press [more] button
4) press [Delay] soft button
5) set [MIDI clk] to on
6) turn [time L] soft knob to bring focus to [Time L] parameter
7) enter 17 into keypad
8 ) press [enter]
result: 14 shows up on main display, and 1/4d is selected. Also note that the label in the main display is incorrect in that it reads "Delay Delay Time". It should probably read "Left DelayTime"