Page 1 of 1

Outs 1/2 bug

Posted: Mon Jan 01, 2018 12:35 pm
by pfrancq
Hello,
First, let me wish a happy new year to everyone.
I have a strange bug since the latest OS version. Sometimes, in the middle of a session, the Out 2 doesn't output any sound anymore (whatever patch I choose). From the level of my sound card, it seems like the results is summed and send to Out 1 (the volume of Out 1 is doubled when Out 2 is silenced). If I turn the Solaris Off/On, everything returns OK (Out 1 and Out 2 output the right sound).
As someone else experienced this strange behavior?

Re: Outs 1/2 bug

Posted: Mon Jan 01, 2018 2:11 pm
by minorguy
There is a known bug in version 1.4.0.1 in which using the Compare function may mess up the modulation sources in a preset. It's possible that you've hit Compare and that changed the modulation source for pan in a VCA. If this is what's happening, please avoid using Compare for the time being. If you haven't used Compare then I'm not sure what the cause could be yet.

Re: Outs 1/2 bug

Posted: Tue Jan 02, 2018 12:41 am
by pfrancq
I didn't use the Compare function. And, at least the last time it appears, it was during a selection of a patch (thus I wasn't modify any modulation options).

Re: Outs 1/2 bug

Posted: Fri Jan 05, 2018 9:14 am
by John Bowen
Hi Pascal,
Very strange - so, if you re-install v1.3.1, you never have this issue with the outputs?

Re: Outs 1/2 bug

Posted: Fri Jan 05, 2018 9:16 am
by minorguy
I'd also like to know if anyone else experiences this.

If it happens again, try to adjust the panning and see if that has any effect. Bypass all FX of course. Try adjusting the Out-1/2 parameter. In short, is there anything you can do by the front panel to bring Out 2 back?

If you continue to have this problem, you may want to revert to OS version 1.3.1 for a while and see if it goes away.

Re: Outs 1/2 bug

Posted: Sat Jan 06, 2018 9:44 am
by pfrancq
I made some panning tests, but I don't remember that it changes anything. I will make some new tests the next it occurs. But it doesn't happen very often. I should also remember (I send an email to John about this a few months ago-, that it happens also sometimes that no sound is sent and that I have to restart my Solaris to restore a normal behavior. But again, it occurs once a while.