Non-linear keytracking

User Feature Request List

Moderator: Solaris Moderators

Post Reply
christeck
Posts: 81
Joined: Sun Sep 21, 2014 9:13 am

Non-linear keytracking

Post by christeck » Thu Oct 16, 2014 11:28 am

The Z1 features the possiblity of non-linear keytracking, with two poles, and two values setting the top most and lowest value, resulting in three sections, the middle one being flat.

In case there is any possibility in the Solaris to achieve this with the existing modules, please let me know. Otherwise, I wouldn't object something similar being implemented :) .

John Bowen
Site Admin
Posts: 1730
Joined: Sat Apr 07, 2007 3:00 am

Re: Non-linear keytracking

Post by John Bowen » Thu Oct 16, 2014 1:21 pm

You will have to use one of the KeyTables to achieve this. These are a little difficult to understand, I know...but just set you 3 points (lowest middle and highest key values), and you should be able to get it to work.

christeck
Posts: 81
Joined: Sun Sep 21, 2014 9:13 am

Re: Non-linear keytracking

Post by christeck » Thu Oct 16, 2014 1:48 pm

Ah. In case that works (didn't try yet) that's just fine with me. Thanks a bunch.

christeck
Posts: 81
Joined: Sun Sep 21, 2014 9:13 am

Re: Non-linear keytracking

Post by christeck » Sat Nov 01, 2014 5:20 pm

John Bowen wrote:These are a little difficult to understand, I know...but just set you 3 points (lowest middle and highest key values), and you should be able to get it to work.
It took me a couple of minutes to get used to it, but it does exacly what I was looking for. Thanks a bunch for the feature and the hint.

Post Reply