Parameter Editing Problem

Moderator: Solaris Moderators

Post Reply
pfrancq
Posts: 21
Joined: Mon Aug 29, 2016 4:51 am

Parameter Editing Problem

Post by pfrancq » Sun Sep 11, 2016 8:19 am

Hi,
I have a strange problem. Sometimes, it becomes impossible to modify the value of a given parameter (for example the coarse parameter of an oscillator or choosing the cut off as modulation destination for a filler). When I turn the corresponding knob, it is like as the value changes and returns automatically to the current value of the parameter. When I switch the Solaris off and on, the problem disappears, and I can again modify all the parameters. I have OS v1.2.1.
Pascal Francq

jgale
Posts: 57
Joined: Sat Sep 27, 2014 1:38 pm
Location: New York

Re: Parameter Editing Problem

Post by jgale » Sun Sep 11, 2016 3:10 pm

It may be a Midi loop - the value you change is transmitted and resets your intended change. If you have Midi cables connected remove them and see if it fixes the issue.

John

pfrancq
Posts: 21
Joined: Mon Aug 29, 2016 4:51 am

Re: Parameter Editing Problem

Post by pfrancq » Fri Sep 16, 2016 12:19 am

The midi loop seems to be the problem. When I break the chain "Solaris -> DAW -> Solaris" into "Solaris -> DAW", the problem disappear.
Pascal Francq

Post Reply