Page 1 of 1

Parameter Editing Problem

Posted: Sun Sep 11, 2016 8:19 am
by pfrancq
Hi,
I have a strange problem. Sometimes, it becomes impossible to modify the value of a given parameter (for example the coarse parameter of an oscillator or choosing the cut off as modulation destination for a filler). When I turn the corresponding knob, it is like as the value changes and returns automatically to the current value of the parameter. When I switch the Solaris off and on, the problem disappears, and I can again modify all the parameters. I have OS v1.2.1.

Re: Parameter Editing Problem

Posted: Sun Sep 11, 2016 3:10 pm
by jgale
It may be a Midi loop - the value you change is transmitted and resets your intended change. If you have Midi cables connected remove them and see if it fixes the issue.

John

Re: Parameter Editing Problem

Posted: Fri Sep 16, 2016 12:19 am
by pfrancq
The midi loop seems to be the problem. When I break the chain "Solaris -> DAW -> Solaris" into "Solaris -> DAW", the problem disappear.