Question about panning modulation

Moderator: Solaris Moderators

Post Reply
pfrancq
Posts: 20
Joined: Mon Aug 29, 2016 4:51 am

Question about panning modulation

Post by pfrancq » Sat Jan 14, 2017 8:24 am

Hi,
First, Happy new year to everyone.
I want a given part to move in the left side of the stereo field. Let's say between 60L and 20L. So I set the VCA InitPan to 40L and add a LFO as modulation source. I try both an amount of 50% and -50%, but the part seems to move behind the range I fixed (in fact, it appears in the right side of the stereo field).
Did I miss something?
Thanks.
Pascal Francq

John Bowen
Site Admin
Posts: 1679
Joined: Sat Apr 07, 2007 3:00 am

Re: Question about panning modulation

Post by John Bowen » Sun Jan 15, 2017 1:42 am

Without any modulation, is the signal appearing in the correct (Left) position at 40L (as you would expect)?

Also, what are your results if you turn on the Offset switch for the LFO?

-john b.

pfrancq
Posts: 20
Joined: Mon Aug 29, 2016 4:51 am

Re: Question about panning modulation

Post by pfrancq » Fri Jan 20, 2017 11:45 am

In fact, I make an extreme test: panning completely left, and put the amount of the LFO à 100%. The sound goes full right as expected.
So my ears are the problem... Sorry.
Pascal Francq

Post Reply