it's only when vca part are modulated
for example i have a
-drum seq patch with snare on vca2 0% modulated by eg2 100%
-stabs patch with vca4 0% modulated by btn2 75%
both are not affected by Multi Volume
(the menu Multi to control Volume of each part of multitimbral)
little complex to explain,
if needed, i can make a video ...
OS2 :: Volume of parts in Multi not affecting vca ...
Moderator: Solaris Moderators
Re: OS2 :: Volume of parts in Multi not affecting vca ...
I can confirm this bevaviour. Here are some easy steps to demonstrate it:
- Setup an init sound with one part (Osc1 - Mixer1 - Filter1 - VCA1); set VCA1 volume to 100%
- Modify the part volume on multi page 1, the volume changes as expected
- Now set VCA1 volume to zero, VCA1 modulation source to e.g. ENV1, modulation intensity to 100% (i.e. volume contour defined by ENV1)
- If you now try to modify the part volume on the multi page, it dos not vary, but stays at full volume
- Setup an init sound with one part (Osc1 - Mixer1 - Filter1 - VCA1); set VCA1 volume to 100%
- Modify the part volume on multi page 1, the volume changes as expected
- Now set VCA1 volume to zero, VCA1 modulation source to e.g. ENV1, modulation intensity to 100% (i.e. volume contour defined by ENV1)
- If you now try to modify the part volume on the multi page, it dos not vary, but stays at full volume
Re: OS2 :: Volume of parts in Multi not affecting vca ...
the manual says
"Volume adds or subtracts from all VCA levels of the Part"
i think the approach was to avoid a multiplication in the calculation of final volume.
i don't know if the add or subtracts on the modulation level could be easy to do ...
"Volume adds or subtracts from all VCA levels of the Part"
i think the approach was to avoid a multiplication in the calculation of final volume.
i don't know if the add or subtracts on the modulation level could be easy to do ...
-
- Site Admin
- Posts: 2002
- Joined: Sat Apr 07, 2007 3:00 am
- Contact:
Re: OS2 :: Volume of parts in Multi not affecting vca ...
I have been informed that what I wrote in the Addendum was incorrect. The calculation for the Part Volume is actually a multiplication of the VCA level by the Part Level, so it is, in fact, a scaling of the VCA Level. What’s not taken into account is the modulation amount of the VCA Level. This will have to be addressed in a future update.
-
- Posts: 14
- Joined: Sat Feb 17, 2018 10:43 pm
- Contact:
Re: OS2 :: Volume of parts in Multi not affecting vca ...
Hi John,
I also confirm this bug, as I wrote in my e-mail yesterday![Smile :)](./images/smilies/icon_smile.gif)
I also confirm this bug, as I wrote in my e-mail yesterday
![Smile :)](./images/smilies/icon_smile.gif)
personnal stuffs : https://www.delchambre.be
the band : http://www.khohd.be
music is just a hobby, an exutory, a cure to me ...
the band : http://www.khohd.be
music is just a hobby, an exutory, a cure to me ...
-
- Site Admin
- Posts: 2002
- Joined: Sat Apr 07, 2007 3:00 am
- Contact:
Re: OS2 :: Volume of parts in Multi not affecting vca ...
Yes, this has been fixed now. Jim is working on the next version for release, so it’s good to get any bugs you find noted here for him to check.
Thanks to all,
John B.
Thanks to all,
John B.
-
- Posts: 14
- Joined: Sat Feb 17, 2018 10:43 pm
- Contact:
Re: OS2 :: Volume of parts in Multi not affecting vca ...
Thank's to you and Jim for your fast feedback.
personnal stuffs : https://www.delchambre.be
the band : http://www.khohd.be
music is just a hobby, an exutory, a cure to me ...
the band : http://www.khohd.be
music is just a hobby, an exutory, a cure to me ...
Who is online
Users browsing this forum: No registered users and 24 guests