we need a forum for reporting bugs, and a process for verifying them. we should probably add feature requests too. I don't think that a forum is a good place for this. Perhaps fogbugz would be a good bug tracking tool for owners.
http://www.fogcreek.com/fogbugz/
I suggest that all bug reports should have the following information included:
Title: should adequately descirbe bug
Software Version:
Status: New, Open, Verified, Duplicate, Closed
Priority: Low, medium, high, Critcal
Bug description and behavior
Expected behavior
Steps to reproduce
Here's an actual Bug I've found:
Title: keypad can not enter [Time L] or [Time R] values greater than 1/4d when [MIDI Clk] is ON.
Version 1.0
Status: New
Description: The keypad can't enter all values of delay times for fractional delay times when midi clock is on. entering values 0-14 do work, but anything greater than 14 will set the value of [Time L] or [Time R] to 1/4d . The display will also show that 14 is entered for any value above 14.
Expected behavior: values over 14 entered on the keypad should correspond with the appropriate delay values
steps to reproduce
1) load init program
2) press [home] button
3) press [more] button
4) press [Delay] soft button
5) set [MIDI clk] to on
6) turn [time L] soft knob to bring focus to [Time L] parameter
7) enter 17 into keypad
press [enter]
result: 14 shows up on main display, and 1/4d is selected. Also note that the label in the main display is incorrenct in that it reads "Delay Delay Time". It should probably read "Left DelayTime"
we need a forum for reporting bugs, and a process for verifying them. we should probably add feature requests too. I don't think that a forum is a good place for this. Perhaps fogbugz would be a good bug tracking tool for owners. [url]http://www.fogcreek.com/fogbugz/[/url]
I suggest that all bug reports should have the following information included:
Title: should adequately descirbe bug
Software Version:
Status: New, Open, Verified, Duplicate, Closed
Priority: Low, medium, high, Critcal
Bug description and behavior
Expected behavior
Steps to reproduce
Here's an actual Bug I've found:
Title: keypad can not enter [Time L] or [Time R] values greater than 1/4d when [MIDI Clk] is ON.
Version 1.0
Status: New
Description: The keypad can't enter all values of delay times for fractional delay times when midi clock is on. entering values 0-14 do work, but anything greater than 14 will set the value of [Time L] or [Time R] to 1/4d . The display will also show that 14 is entered for any value above 14.
Expected behavior: values over 14 entered on the keypad should correspond with the appropriate delay values
steps to reproduce
1) load init program
2) press [home] button
3) press [more] button
4) press [Delay] soft button
5) set [MIDI clk] to on
6) turn [time L] soft knob to bring focus to [Time L] parameter
7) enter 17 into keypad
8) press [enter]
result: 14 shows up on main display, and 1/4d is selected. Also note that the label in the main display is incorrenct in that it reads "Delay Delay Time". It should probably read "Left DelayTime"