OS2 :: Volume of parts in Multi not affecting vca ...

Moderator: Solaris Moderators

kalaspace
Posts: 25
Joined: Wed Feb 26, 2014 5:37 am
Contact:

OS2 :: Volume of parts in Multi not affecting vca ...

Post by kalaspace »

it's only when vca part are modulated
for example i have a
-drum seq patch with snare on vca2 0% modulated by eg2 100%
-stabs patch with vca4 0% modulated by btn2 75%
both are not affected by Multi Volume
(the menu Multi to control Volume of each part of multitimbral)

little complex to explain,
if needed, i can make a video ...
Octupole
Posts: 32
Joined: Mon Oct 31, 2011 10:47 am
Contact:

Re: OS2 :: Volume of parts in Multi not affecting vca ...

Post by Octupole »

I can confirm this bevaviour. Here are some easy steps to demonstrate it:
- Setup an init sound with one part (Osc1 - Mixer1 - Filter1 - VCA1); set VCA1 volume to 100%
- Modify the part volume on multi page 1, the volume changes as expected
- Now set VCA1 volume to zero, VCA1 modulation source to e.g. ENV1, modulation intensity to 100% (i.e. volume contour defined by ENV1)
- If you now try to modify the part volume on the multi page, it dos not vary, but stays at full volume
kalaspace
Posts: 25
Joined: Wed Feb 26, 2014 5:37 am
Contact:

Re: OS2 :: Volume of parts in Multi not affecting vca ...

Post by kalaspace »

the manual says
"Volume adds or subtracts from all VCA levels of the Part"

i think the approach was to avoid a multiplication in the calculation of final volume.
i don't know if the add or subtracts on the modulation level could be easy to do ...
John Bowen
Site Admin
Posts: 2002
Joined: Sat Apr 07, 2007 3:00 am
Contact:

Re: OS2 :: Volume of parts in Multi not affecting vca ...

Post by John Bowen »

kalaspace wrote: Tue Dec 29, 2020 11:10 am the manual says
"Volume adds or subtracts from all VCA levels of the Part"

i think the approach was to avoid a multiplication in the calculation of final volume.
i don't know if the add or subtracts on the modulation level could be easy to do ...
I have been informed that what I wrote in the Addendum was incorrect. The calculation for the Part Volume is actually a multiplication of the VCA level by the Part Level, so it is, in fact, a scaling of the VCA Level. What’s not taken into account is the modulation amount of the VCA Level. This will have to be addressed in a future update.
delchambre
Posts: 14
Joined: Sat Feb 17, 2018 10:43 pm
Contact:

Re: OS2 :: Volume of parts in Multi not affecting vca ...

Post by delchambre »

Hi John,
I also confirm this bug, as I wrote in my e-mail yesterday :)
personnal stuffs : https://www.delchambre.be
the band : http://www.khohd.be

music is just a hobby, an exutory, a cure to me ...
John Bowen
Site Admin
Posts: 2002
Joined: Sat Apr 07, 2007 3:00 am
Contact:

Re: OS2 :: Volume of parts in Multi not affecting vca ...

Post by John Bowen »

Yes, this has been fixed now. Jim is working on the next version for release, so it’s good to get any bugs you find noted here for him to check.

Thanks to all,
John B.
delchambre
Posts: 14
Joined: Sat Feb 17, 2018 10:43 pm
Contact:

Re: OS2 :: Volume of parts in Multi not affecting vca ...

Post by delchambre »

Thank's to you and Jim for your fast feedback.
personnal stuffs : https://www.delchambre.be
the band : http://www.khohd.be

music is just a hobby, an exutory, a cure to me ...
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests