Level Mod destinations for rotors
Posted: Mon Mar 16, 2020 8:12 am
I hope it's planned because it's holding back the full potential of the rotors for timbral morphs 
John Bowen Synth Design
John Bowen Synths Community
https://forums.johnbowen.com/
Level Mod destinations for rotors
Page 1 of 1
Re: Level Mod destinations for rotors
Posted: Mon Mar 16, 2020 8:47 pm
Can you explain further what it is you are requesting?
Re: Level Mod destinations for rotors
Posted: Tue Mar 17, 2020 9:37 am
Hello John !
Well adding the inputs levels in the Pitch, Xfade menu ...
Of course if someone wants to use only levels modulation, he'll have to sacrifice Pitch and Xfade or choose combos like levels 1 and 3 modulated with also Xfade and Pitch modulation.
If you manually tweak one level amount, you can hear the effect of a quarter section of the " rotored " waveform, thus the request.
Also inspired by the MOK Waverazor oscillator.
Well adding the inputs levels in the Pitch, Xfade menu ...
Of course if someone wants to use only levels modulation, he'll have to sacrifice Pitch and Xfade or choose combos like levels 1 and 3 modulated with also Xfade and Pitch modulation.
If you manually tweak one level amount, you can hear the effect of a quarter section of the " rotored " waveform, thus the request.
Also inspired by the MOK Waverazor oscillator.
Re: Level Mod destinations for rotors
Posted: Tue Mar 17, 2020 9:44 am
Do you mean to be able to modulate the input levels just the same way the mixers allow? So, adding Input 1,2,3,4 to the Destination List for the mod paths?
Better to add modulation directly to the inputs so it’s exactly the same as the mixers. Then have the Mod paths free to do Pitch or Xfade.
Better to add modulation directly to the inputs so it’s exactly the same as the mixers. Then have the Mod paths free to do Pitch or Xfade.
Re: Level Mod destinations for rotors
Posted: Tue Mar 17, 2020 11:18 am
Exactly like the mixers would be great indeed ! 