Envelope release time

Moderator: Solaris Moderators

Post Reply
Pro69
Posts: 4
Joined: Sat Aug 10, 2019 12:08 am

Envelope release time

Post by Pro69 »

Can somebody tell me, how to set a very long release time. In the menu it must be 20 seconds, but I can’t manage such a long release time, five seconds maybe. I set all 6 envelopes release max, in the Mixer section everywhere I adjusted, to achieve a long release time. I don’t know what mistake I do.

John Bowen
Site Admin
Posts: 1877
Joined: Sat Apr 07, 2007 3:00 am

Re: Envelope release time

Post by John Bowen »

When you dial the Release time to the right, you should get 20.00 seconds within 3 turns of the knob. Are you not seeing that?

minorguy
Posts: 102
Joined: Fri Dec 05, 2014 12:09 pm
Location: San Jose, CA, USA

Re: Envelope release time

Post by minorguy »

Also note that if the slope is set to 127 (exponential) the time will seem shorter. Try setting it to 0 (linear).
Solaris #249

Pro69
Posts: 4
Joined: Sat Aug 10, 2019 12:08 am

Re: Envelope release time

Post by Pro69 »

Thanks, the slope rate was the key.

Post Reply